Docs / MIDI

Common MIDI setups

These are step-by-step setups for the most common uses of MIDI. Each one starts with MIDI turned on and your device connected. See MIDI to get that far.

MIDI needs Backstage.

Requires Backstage

Turn pages with a MIDI footswitch

Two switches on a MIDI foot controller can move forward and back through Live Mode.

  1. On the Triggers tab, select Add Trigger in the Inbound card.
  2. Select Edit Custom Command, then Add Command. Select Listen and press your forward switch, then select Add, then Save.
  3. Leave the Event on Received, and choose Step Forward as the Action.
  4. Select Add.
  5. Do the same for your back switch, with Step Backward.

The same two switches can also jump a whole song when you hold them. Add a trigger to each with the Held event: Go to Next Song on the forward switch and Go to Previous Song on the back one. See Control Songstead with MIDI.

Change patches as each song starts

Your keyboard, amp modeler or effects can change to the right sound the moment each song starts in Live Mode.

  1. On the Saved tab, select Add Command, and give it a Name, like Clean tone.
  2. Select Add Command, then Listen, and pick the patch on your device. Select Add, then Add again.
  3. Make a saved command for each sound you use.
  4. On the Triggers tab, select Add Trigger in the Outbound card.
  5. Choose Song starts as the Event, and the song as the Song.
  6. Open the Saved tab under Then send these MIDI commands, and choose the saved command.
  7. Select Add, and do the same for each song.

A song can change several devices at once. Give its saved command one command for each device, each with its own To. See Send MIDI from Live Mode.

Let another device pick the song

A lighting desk, a backing-track computer or a footswitch with numbered presets can choose the song in Live Mode by sending a Program Change.

  1. On the Triggers tab, select Add Trigger in the Inbound card.
  2. Choose Go to Song by Number as the Action.
  3. Select Edit Custom Command, then Add Command. Select Listen and send any Program Change from the device, then select Add, then Save.
  4. Select Add.

Program 0 now goes to the first song in the set, Program 1 to the second, and so on. See Go to Song by Number.

Keep tempo-synced gear in time

A delay pedal, drum machine or arpeggiator can follow each song's tempo.

  1. Give each song its tempo. See Songs.
  2. On the Setup tab, turn on Send Clock.
  3. Set your device to follow external MIDI clock, in its own settings.

See Send Clock.

Pass a press on to the rest of your rig

One footswitch press can turn the page and switch on an effect at the same time.

  1. Add an inbound trigger for the switch, as in Turn pages with a MIDI footswitch.
  2. Add a second inbound trigger for the same switch and the same Event, and choose Send MIDI Command as its Action.
  3. Under the action, select Edit Custom Command and add what the effect needs, like a Control Change.
  4. Select Add.

A remote for your keyboard rig

A tablet on the music stand can hold the controls you reach for most.

  1. On the Remote tab, select New Remote, name it, choose Tablet, and select Create.
  2. Select the plus on an empty square, and add a Toggle named Rotary, sending one Control Change to turn on and another to turn off.
  3. Add a Fader named Expression, driving your keyboard's expression controller, often Control Change 11.
  4. Add a Text control named Organ over them as a heading.
  5. Select Save, the disk button at the top right.

See MIDI Remote.